Product Categories
- Wall Socket&Switch
- Smart WiFi Indoor Bulb
- Zigbee 3.0 Smart Home
- SELF POWERED SWITCH
- Smart WiFi Wall Switch
- Smart WiFi Wall Socket
- Smart WiFi Power Strip
- Smart WiFi Mini Plug
- Smart WiFi Waterproof Socket
- Smart WiFi Safety Sensor
- Smart WiFi IR Remote Control
- Smart WiFi Camera
- Smart WiFi Water Valve
- Smart WiFi Temperature Controller
I. matters needing attention:
2. This product is an infrared remote control accessory for mobile phones. It can only control common household appliances with infrared remote control, but cannot be used to remote control household appliances using bluetooth, wifi, 2.4g, radio frequency, Zigbee and other methods. However, most of the current air conditioning, television, set-top box and other appliances are basically using the infrared remote control..
3. Indoor use only
Working temperature:- 10 ~ 50 degrees
Working humidity:Less than or equal to 85%
The power input:5V 1A Micro USB
Standby power:Less than 0.55 W
Controllable distance:7M (front)
Status indicator light:Blue LED
Learning lamp:Orange, blue LED
The system supports:Apple & android
Shell material:ABS transparent
The wireless network:Wifi2.4G 802.11b/g/n
Network range:Wifi coverage area
Security mechanism:WPA/WPA2
Encryption type:WEP/TKIP/AES
Temperature and humidity:Support temperature and humidity
RF Remote Controller:Support 98% 433 MHz (RF devices),
Except rolling code.
Infrared frequency:38—56KHZ
Infrared remote control:Support most household appliances which use infrared signal,support learning function
Method of use
Step 1: register and log in to the smart living application.
If you don't have an account for the "" smart life" "app, use your email or phone number to sign up for an account.
Make sure your phone is connected to the WiFi in your home. Click "+" in the top right corner of the home page, and you'll see a selection page, pull to the end, and select "universal remote control."
Step 2: connect the device to the power supply, long press the "reset" hole for more than 5 seconds, until the blue indicator enters the fast flicker mode. Click "make sure the indicator lights flash quickly" on the APP.
Step 3: enter your phone's WiFi password, and then click "ok" to start searching for the device.
Step 4: go to the device page and complete the configuration. Then click add to see the page select the device type. Select appliances to control. Take the air conditioner.
Step 5: select your air conditioner brand, and then you can see the control page. Click the power button to see if your air conditioner can be turned on/off. If yes, click "available to use" and finish. If not, click "can't be used," then select the next template, and then click the power button to see if your TV can be turned on/off until it works.